Cable ties every day produced huge quantity production. So the packing is one of a very important job for cable ties mass production. Cable ties are packed with poly-bag, before sealing the bag mouth, the machine will inject some water into the poly-bag. In order to compensate the cable ties moisture content. Off course, if your cable ties produced by hot runner cable tie mould, then no need to compensate the moisture.
Taizhou Xiongshi Plastic Mould Co., Ltd provide this semi-auto cable ties packing machine also. Then client can get cable ties production line equipment easily. Welcome to contact us to inquire about this machine.
Vacuum Packaging Machine Water Injection Volume
Products within 3×200: 3.5%
Products 4×150 and above: 4%
Products 5×150 and above: 4.5%
Products 8×200 and above: 5%
Products 10×200 and above: 5.5%
The above applies to white and colored products.
For black products, add an additional 0.5% to the water volume specified for white products.
Water adjustment is calculated as: the weight of each package × the corresponding percentage = the amount of water in grams.
For example: Product 4×150, package weight 230 grams
230 × 0.04 = 9.2 grams of water.
Above is PA66 material cable ties setting, if material is PA6, water weight setting less than PA66 by 1%.